Admin Login, User, Password and IP

1873 Admin Login, User, Password and IP

An admin can make changes to a network. That affects can be observed in limiting website access or to a device. Each device that is connected to a network has its own IP (Internet Protocol) address. IP address is basically used for communication with host by establishing a path to it. There are numerous IP addresses available and is one amongst many. Admin Login, User, Password and IP

About the IP Address

TCP/IP has five classes of IP address class A, B, C, D and E. Every one of them is differentiated by their first value. is in Class C. In these first three values that are “” is used to identify the network. Identification of host is done through the last value that is “254“.

Access and Login to Admin Panel

To have access to the administrator panel you must know the IP address. Along with the IP address, you must know the username and password associated with it.

Step 1 – Enter the IP address in the address bar of the browser. Admin Login

Step 2 – Username and password should be entered in the given spaces.

Step 3 – If the correct details are entered new page will open. It will be the admin page with various available functions.

Step 4 – There are different functions ranging from security to new devices. You can configure the way you desire. One can add new devices or admin network services. Even it is possible to connect devices at remote sites. You can alter the bandwidth at which it operates and many other things. Admin Page

Note – It is suggested to change the credentials that is username and password. To make sure the risk of unwanted access is reduced.

More IP Login Guides:

Default User and Password For IP Address

The default username and password can be retrieved from the manual. Manual comes along with the router. Many routers have default username and password as “admin” and “admin” respectively. However, these may differ from one router to another as per their manufacturer. If the manual is not there one can still get username and password. They are mentioned on the side of the router.

While we are using the router the credentials can be altered at any time. To alter just reset the router by pressing the reset button. After a few seconds, the router will get back to its default settings. Then you can change the username and password as per your wish and use it.

What To Do If You Cannot Access Login Page

There can be instances where one will not be able to access their login page. It may be due to the hardware problem or an internal function glitch. It can be eliminated by using few ways as given below:

1. Reset the Wi-Fi or Ethernet adapter.

2. Update your Network adapter drivers.

3. Disable the auto-login feature on your Windows

4. Uninstall your network adapter drivers.

5. Change the network adapter drivers.

Using any one method listed above may help you to solve the problem. However, if the problem persists you should contact your network provider.

How to Change the Password of Your Router

Most of the time the routers are shipped with default passwords. Changing it to a password by you is a good first step. Firstly, it will be easier to remember it rather than random characters and letters. Secondly, it will enhance the security of the network. Following steps can help you to change the password.

Step 1 – Enter the IP address in the address bar of the browser.

Step 2 – Username and password should be entered in the given spaces.

Step 3 – Now you will be onto the admin page. There would an option to reset the password, select it and enter the new password.

Step 4 – Now, you are ready with the new password. It can be used from the very next time you try to log in.

Also Read:

How to Change the Address

There may be an instance where you want to change your IP address. Many reasons are there which may lead an individual to that state. One reason can be due to a conflict of IP address. Another can be of that particular IP being blocked by the network.

Step 1 – Enter the IP address in the address bar of the browser.

Step 2 – Username and password should be entered in the given spaces.

Step 3 – Now you will be onto the admin page. Click on Setup > Network Settings.

Step 4 – On router settings enter the new IP address and subnet mask. PC network settings need to be adjusted as the IP address is changed. So, you could access the network again.

Step 5 – Then click on save settings. Thus following the above steps may help you to change the IP address. However, if you still face any issue you should contact the network provider for more information.


Now you have all the basic knowledge that would be required to handle an admin page. You learnt the basics about what an IP address is and how it works. It is important to learn that because it gives you the background knowledge of the system. It is important that you configure the router in a secure manner. As it may decide how safe you and your data are on the network. Additionally, you learnt the important functions which may come handy in extreme cases. Access to admin is very crucial. Whether you want to change the IP address or the password you need admin access.