10.0.0.2 IP Admin Login, Username, Password

Confused with how to get into your router settings? wondering what this magical number is, well this post is for you. 10.0.0.2 this is called an IP (INTERNET PROTOCOL) address and in our case, it’s our router default gateway. whereas 10.0.0.2 is a subnet of our default IP in a local network which would enable us to accesses the settings of the router in a private network without any network conflicts. Consider this as a secret lock that would appear only when you type this number into your URL box and its key would be the password which we would discuss later on.

10.0.0.2 IP Admin Login, Username, Password

What is 10.0.0.2 Router Login Used For?

Undoubtedly, 10.0.0.2 router login gives access to various settings which are very useful for unlocking the full potential of the router. Moreover, it provides a user the power to tweak and optimize their network performance as per their need, router settings give access to the following.

1. Set WLAN

WLAN stands for wireless local area networks. The router settings enable you to set up your WiFi SSID and the desired password. This SSID would be the name of your WiFi network.

2. Set WiFi Channel

The WiFi channels are the medium that makes the transaction of data possible in a wireless medium. Importantly, there are two bands namely 2.4 GHz and 5.0 GHz band, the 2.4 GHz has 11 channels and the 5ghz has 45 channels. these channels allow you to avoid network congestions in a WLAN.

3. IP QoS

IP QOS stands for Internet Protocol Quality of Service. QoS is a technology that manages traffic in our case data traffic because of this feature latency, packet loss, lag, and jittering have a negligible effect over the network. This feature allows setting different bandwidth for different loads.

4.  Set LAN

The router settings allow you to set up a LAN which stands for Local Area Network which is good for high-speed and short-distance data transmission.

5. Set WAN

Within the router setting, there is an option for WAN which stands for Wide Area Network. These types of networks are good for long-distance transmission of data.

6. DNS Settings

 DNS stands for Domain Name Systems this converts alphabetic domain names into IP numbers and is a protocol. DNS servers can be assigned by accessing the DNS setting.

7. DHCP

DHCP stands for Dynamic Host Configuration Protocol and is an essential setting as it automatically assigns an IP address to devices sequential from a range of numbers.

8. Proxy Settings

Proxy settings use proxy servers which provide a medium for connection between two endpoint devices.

9. Mac Address

A Medium Access Control Address is an identifier in the network interface for hardware devices and lets the network know the number of connected devices in the network. There are many more settings which you can access by login into the router but these are the most basic and useable setting form.

 10.0.0.2 IP Admin Login

It’s simple to accesses the admin login page by following these steps:

Step 1 – Open any browser (Chrome, Internet Explorer, etc.) and in the URL address box type 10.0.0.2 hit enter.

Step 2 – Your browser will redirect you to https://10.0.0.2 or 10.0.0.2.

10.0.0.2 IP Admin Login

Step 3 – Enter your credentials here and hit Enter.

Step 4 – After successful login, you will be able to access the router settings.

10.0.0.2 IP Admin Page

If you are entering the admin page for the first time the user name and password are written at the back of the router or you can find them on the official website of your router.

Also Read:

 What To Do In Case You Don’t Remember Your Password?

It happens to the best of us, ways to avoid this is to set a password which you use regularly or write it down somewhere same but if this is not the case and you can’t remember the password then look at the back of the router there should be a reset button by using a pointed object press and hold the reset button for about 20- 30 seconds and it would factory reset your router.

How to reset the wireless router password?

To reset the router password press and hold the reset button for 20 to 30 seconds this will reset the router to its default settings.

How to Reset Router

How To Change the Default Login and Password

In order to change the default login and password follow these steps

Step 1 – First of all, open the browser and in the address box type 10.0.0.2 and hit enter.

Step 2 – Then, on the login page, enter the default login and password 

Step 3 – After login to router settings search for change the password setting under the wireless section and set up a unique password more than eight characters which include some special characters.

Change the Default Login and Password

Step 4 – SSID stands for service set identifier and generally is the name of the WiFi signal. Set a unique SSID in order to avoid easy access to a hacker.

Step 5 – Lastly, the security settings tab enables WPA2-PSK encryption. Set a password which is easy to remember.

More IP Login Guides:

How to Reset Telkom Router Password 

In order to reset your Telkom router follow these steps:

Step 1 – Firstly, find the reset button at the back of the router.

Step 2 – Secondly, press and hold the reset button with the help of a pointed object for 30 seconds.

Step 3 –Lastly, release the button and your router is reset to factory settings.

Conclusion

Finally, log in into your Telekom or D-Link router would give access to the advance feature as well as it would help you to connect t your internet services provider and save the settings into its memory so you don’t have to login in again and again to get connected to the world wide web. Apart from this, the router settings allow you to tweak and customize settings according to your usability and environment because of this you can unleash the full potential of your internet without any hassle.