Keeping an eye on the Clock Watchdog Timeout or Timeout System freezing is caused by the Blue Screen of Death mistake. Rebooting is the only way to get your PC back up and running properly. BSODs are less annoying in Windows 10 because they’ve made it more user-friendly, but they’re still a major problem. It is possible that users who have been working on important files and papers may lose their data.
- 1 Troubleshooting Windows 10/8/7 Clock Watchdog Timeout
- 2 Solution 1: Do Not Increase Your CPU’s Speed.
- 3 Solution 2: The BIOS can be updated.
- 4 Solution 3: Devices and drivers should be disconnected in order to resolve this issue
- 5 Solution 4: Use External Speakers to Play Sound
- 6 Solution 5: Provide A Memory Dump From The Kernel
- 7 Solution 6: Restart the computer and press F8 to access the BIOS menu.
- 8 Solution 7: Remove Virtual Image Managers from your computer
- 9 Solution 8: Examine the CPU to see whether it’s faulty
- 10 Solution 9: Avoid allowing your computer to overheat.
- 11 Conclusion
Troubleshooting Windows 10/8/7 Clock Watchdog Timeout
The Clock Watchdog Timeout issue can be solved in a number of ways, but it’s best to try them all out before making a final decision.
Solution 1: Do Not Increase Your CPU’s Speed.
The majority of the time, these kinds of issues are the result of CPU overclocking. CLOCK WATCHDOG TIMEOUT Blue Screen of Death is caused by CPU faults. As a result, you’d be wise to take a look.
When you overclock, you increase the processor’s speed and frequency above the factory settings. PC performance can benefit greatly from this. As long as you take precautions. It’s because people have accidentally set their PCs to dangerously high overclocking temperatures on several instances. Alternatively, they could have been careless.
The programme you used to overclock your CPU has a direct impact on whether or not you can get it back to its original frequency. Downloads are available for the software from both Intel and AMD. Users can increase the speed of their CPUs with the help of this programme. Users, on the other hand, have a plethora of options.
Check to see if the Clock Watchdog Timeout problem occurs again after you cease overclocking your PC.
Solution 2: The BIOS can be updated.
The BIOS (basic input-output system) is a piece of built-in software on the motherboard of every computer. It is the first programme that your computer loads. From the minute you switch it on you can use CD drives, keyboards, and mice.
So, if you’re experiencing BSOD problems, you may benefit from a BIOS update. Having problems with your computer’s BIOS settings can cause it to malfunction. Here are the steps you need to follow:
Step 1: Identify the current BIOS version installed on the PC. In the search bar at the start menu, type msinfo.
Step 2: After that, locate your processor model’s BIOS version. Then, save or print off everything you’ve written in a text file or on paper.
Step 3: Find out whether your computer was pre-built, bundled or manually assembled after purchasing all of the components separately in step three next.
Step 4: In order to avoid overwriting the BIOS with a faulty one, you must make sure the BIOS is compatible with all of the components in your PC. In the long run, this will cause serious mistakes and system issues.
The computer is now ready for the upgrade. If you plan to connect in your laptop, be sure the battery is completely charged. Using a UPS, or Uninterrupted Power Supply, while updating your computer is recommended. With a UPS, you can be certain that your computer will not shut down mid-update due to a power failure.
Step 5: : Various desktop and laptop updates have their own set of instructions that must be followed.
Solution 3: Devices and drivers should be disconnected in order to resolve this issue
One of the common causes of BSOD errors. System instability can be caused by peripherals such a mouse, keyboard, and printer that are incorrectly setup. System instability can also be caused by out-of-date drivers. Every few hours or minutes, the same mistakes are made again and again. You can, however, correct this if you put in the effort.
Step 1: In the search box, type Device Manager. Select the first result that appears.
Step 2: Next, select View from the View menu and turn on the “Show hidden devices” checkbox. Scanning Device Manager for devices with an error notice next to their name will help you identify the problem quickly and easily
Step 3: Finally, click the arrow next to their name and continue your search by clicking on it.
Step 4: Hardware failure is the most common cause of BSODs (9 out of 10 times). The problem occurs with Universal Serial Bus controllers that display the error message “Unknown USB Device” in the device name (Device Descriptor Request Failed).
Step 5: Turn off your computer and open the device management. Next, one by one remove all USB devices from your computer (it includes a mouse, keyboard, webcam, etc.)
Step 6: After removing the hardware component that was causing the BSOD, the error known as “Unknown USB Device” should be resolved.
Step 7: Reconnect all devices if this problem does not appear. Turn off “Show hidden devices” in the View menu by unchecking the box. Finally, make sure the Unknown USB Device is displayed. Remove all gadgets one by one till the problem goes away.
Step 6: In this step, you should be able to identify the external device that caused the BSOD.
Step 7: Make sure the concealed gadgets are clearly visible in this step. Disconnecting the technique that was creating the issue is necessary. Locate the device in the Universal Serial Bus controller, right-click on it, and then select Uninstall Device.
Finally, reboot your computer and see if the problem has been resolved.
It’s easy to reinstall the driver for a problematic device by searching Google for the model number of your device and then obtaining it from the manufacturer’s website.
Solution 4: Use External Speakers to Play Sound
For those who have two sets of speakers, this strategy is appropriate (both internal and external ones). When Windows tries to switch between the internal and external speakers, this problem can occur. The internal speakers may not work after removing the other set, however it is something you can repair. To repair this problem, follow the instructions outlined below:
Step 1: Locate the volume icon on your desktop, which is located at the bottom right. Click on the playback devices by right-clicking on it and then clicking on the devices.
Step 2: Disable the pair by right-clicking on it and selecting Disable from the drop-down menu.
Step 3: Ensure that the other speaker is functioning properly. Because if both speakers stop working, you can’t play sound.
Step 4: Reboot your PC to see if the Clock Watchdog Timeout issue has been resolved or not.
Solution 5: Provide A Memory Dump From The Kernel
With the aid of a Windows debugger, IT professionals may readily access a kernel memory dump. It’ll show you exactly where the problem is and how to fix it in a flash. The Command Prompt can also be used to execute the utility.
Step 1: Type about command prompt into the search bar and see what comes up. Now right-click and choose Run as Administrator.
Step 2: In the Command Prompt, enter the following command. Then press the enter key:
Step 3: Verifier.exe /standard /all /options
This will also cause a BSOD and create a log file in the C:WindowsMinidump folder. Step 3: Finish the process by clicking Finish.
Step 4: Now comes the tricky part. However, there are a number of debugging tools that might help you with this. From here, you may get the files. It can be found in the Windows 10 Debugging Tools (WinDbg) section of the Get Windows Debugging Tools page (WinDbg).
Step 5: After you’ve downloaded the SDK, make sure everything is deselected. If you don’t plan on using any other Windows applications, you can exclude the Debugging Tools for Windows from the installation step.
Step 6: After the utility has been installed and named windbg, look for it and execute it.
Step 7: Open the Crash Dump in the File menu after that. Go to C: WindowsMinidumpFolder and locate the minidump file.
Once the file is opened, you can look towards the bottom of the document. There’s a sentence there that says, “Caused by.” As a result, this indicates which driver is responsible for the problem.
Uninstall the driver from the device management in the final step. The driver can be uninstalled by right-clicking on it and selecting Uninstall the Device from the context menu. Also, make sure the gadget is plugged in before you start playing.
Step 8: If you don’t want to reinstall the driver, there’s also the option of updating it.
Step 9: It’s time to reset your BIOS to factory settings.
As long as your BIOS has been updated. It’s also a good idea to reset the BIOS if you’re concerned that something will go wrong during the installation. To reset your BIOS, perform the instructions outlined below:
The F8 key isn’t required in every situation. The bottom message of your boot screen contains a button that you must click. (the page with your PC manufacturer’s logo and name on it):
Step 1: Run Setup by pressing .
Step 2: Now, not all manufacturers’ BIOS settings are the same. But make sure you’re familiar with the controls because you won’t be able to use a mouse in BIOS mode.
Step 3; First and foremost, look for the button labelled “Setup Defaults” on the toolbar. When prompted, press the Enter key.
Step 4: In the event that this isn’t an option, select Load Setup Defaults from the Exit tab in BIOS. When prompted, press the Enter key.
Step 5: Once your computer has started up, navigate to the Exit Saving Changes option and exit.
Step 6: Verify if the Clock Watchdog Timeout issue has been rectified.
Solution 7: Remove Virtual Image Managers from your computer
Creating virtual discs and images with programmes like Daemon Tools and Alcohol 120 percent is used to manage ISO files. BSOD has been connected to a large number of these tools. As a result, installing them is highly recommended for the time being. Daemon Tools can be replaced with Alcohol 120 percent as an alternative.
Step 1: Start by typing settings into the search box and then selecting the first option that appears.
Step 2: Go to the Apps menu. When you’ve found the programme you want to get rid of, tap the uninstall button to remove it.
Step 3: Follow the on-screen directions to launch the uninstall wizard and complete the process.
Solution 8: Examine the CPU to see whether it’s faulty
If your CPU is malfunctioning and exhibiting problems on its own, it’s time to get a new one. However, the cost of making this option can be high. However, it’s worth it because it will keep your computer running smoothly.
Check your CPU first with a qualified IT professional, and they will identify any problems with your CPU.
If the problem persists, pay attention to their advice on which model would be best for your setup.
Solution 9: Avoid allowing your computer to overheat.
One of the leading causes of system instability, crashes, and freezes is overheating. Because the laptop’s cooling system is weak and it is in a warm room while performing a demanding task. Here are a few tips to keep your PC from overheating in the future:
Step 1: One of the easiest ways to keep your computer cool is to remove anything that could obstruct the air flow.
Step 2: Cleaning the PC’s internal fans is a great way to keep it cool. The CPU has one, the power supply has one, and the chassis has one or more fans on the front and back.
Step 3: Heat accumulation can be so severe in high-end computers that even the most powerful and quickest fans fail to keep them cool. Installing a water cooling system can aid in these situations.
I sincerely hope you found this information to be helpful. Keep an open mind as you read. It’s been a pleasure having you here today.