Application Error ‘0xC0000005’ In Windows 10, 8 And 7

0
356
How To
How To

Numerous users have reported seeing Error 0xc0000005 while attempting to utilise the Application Error 0xc0000005. The fact that Windows has remained at the top of the OS list for so long should go without saying.

It runs without a hitch and executes every order given to it. Throughout the years, it has consistently met or exceeded expectations. When it comes to operating systems, Microsoft Windows is without a doubt the most dependable and trustworthy one yet.

No matter how well it performs and how many years it lasts, Windows is still a product of human ingenuity. All operating systems, including this one, are prone to faults. There is a specific cause for each and every error that appears on your computer.

This is a sign that your computer needs to be repaired. Ignoring faults is never a good idea because it will just lead to more serious issues down the road. As a result, the best course of action is to get rid of them as soon as possible.

How To
How To

The application error 0xc0000005 is one such error that many users have run through. In the past, several people have come forward with similar complaints. Your computer may not be able to run a certain programme or installation because it cannot process the unique settings and essential files.

If this error code isn’t taken care of in a timely manner, it might lead to more serious problems, such as a lack of RAM, corrupt files, and erroneous settings.

Read Also:

  1. 0x80080005
  2. Sim Not Provisioned MM#2
  3. Kmode Exception Not Handled

Understanding Application Error 0xC0000005:

Application Error 0xC0000005 is a hexadecimal error code that indicates an access violation, often referred to as an ‘Access Violation Exception.’

This error occurs when an application attempts to access memory location(s) that it is not authorized to access. As a result, the application crashes or fails to execute properly, leading to inconvenience for the user.

Possible Causes of Application Error 0xC0000005:

Several factors could contribute to the occurrence of Application Error 0xC0000005:

  1. Memory Access Violation: The most common cause of Error 0xC0000005 is a memory access violation, where an application attempts to read from or write to a memory address that it does not have permission to access.
  2. Corrupted System Files: Corrupted or damaged system files within the Windows operating system can lead to application errors, including Error 0xC0000005.
  3. Hardware Issues: Faulty hardware components, such as RAM modules or storage drives, can cause memory access violations and trigger Error 0xC0000005.
  4. Software Conflicts: Incompatible or outdated software, conflicting applications, or driver issues can also result in Error 0xC0000005 when running certain programs.
  5. Malware or Virus Infections: Malicious software or virus infections on your computer can corrupt system files, interfere with application processes, and trigger Error 0xC0000005.

Methods To Fixing Error in an Application 0xc0000005

When you know what this error can cause, you need to fix it quickly. In order to avoid seeing the dreaded 0xc0000005 pop-up window, use the suggestions listed below:

Method 1: Stopping DEP

DEP (Data Execution Prevention) is a set of security mechanisms employed by Microsoft. Non-executable discs and memory segments are not allowed to run code on the system due to this feature.

As a general rule, this is a great feature for computers, but in this situation, it may have have contributed to the issue. You can disable DEP by following the procedures listed below:

Step 1: To open the Run command, press the Windows key and ‘R’ at the same time.

Step 2: To begin, type “sysdm.cpl” into the empty field and press Enter to begin the process.

Step 3: You’ll be taken to your computer’s System Properties. The ‘Advanced’ tab and the ‘Settings’ button are located here.

Step 4: The Performance Options window will open up. Go to the ‘Data Execution Prevention’ tab.

Step 5: After you’ve clicked “Turn on DEP for all services and apps except those I specify,” you’ll notice an additional option. Make sure the checkbox next to it is ticked and then click “Add.”

Step 6: Locate and open the application that caused the error.

Step 7: To save your changes, click ‘Apply’ and then ‘OK.’

Your problem will be solved in the simplest and most effective manner possible if you do this. The developer’s team must be contacted if this technique does not function on your machine for any reason, and the software must be altered to an authenticated one.

Method 2: Refurbishing Windows

Refurbishing your windows is an option that you might consider next. Updates to your operating system can also help, but there’s a good chance that the “Windows Update Not Working” message will pop up. A refurbishment would be more appropriate.

In the same way, the following are the steps to take:

Step 1: Take a look at the properties of this computer by right-clicking on it in File Explorer.

Step 2: Next, click the “Advanced System Settings” icon in the upper left corner of your screen.

Step 3: Select “System Protection” and then “System Restore” from the drop-down menu.

Step 4: You’ll be redirected to a page with a series of instructions. Once you’ve done that, you might choose to go to a Restoration Point. Wait for a time before moving on to the next step.

Method 3: Erasing Bad RAM Memory

The 0xc0000005 programme error is frequently caused by faulty RAM memory. The domino effect is likely to be at play if you don’t notice a difference after purchasing a new RAM module. In this case, use the following procedure to remove it:

Step 1: Disconnect any external gear and cables from your computer before beginning the technique. Remove the battery immediately if the device is a laptop.

Step 2: Turn off your computer.

Step 3: When you’re done installing your RAM, you’ll need to remove it from the motherboard.

Step 4: Check to see if the error reappears by restarting your computer.

Method 4: Register Setup/Repair

Let us now turn our attention to the final option on the list. When it comes to your computer’s registries, they play a crucial role in storing information about various programmes, applications and other software on your computer.

Corruption of these registers can occur as a result of performing a high number of hefty downloads followed by uninstallations or partial installations. Follow the steps below to restore them to their original state and remove the problem at the same time:

Step 1: CCleaner is required for this strategy to work, so download it first.

Step 2: Run the software when it has been installed.

Step 3: Go to the ‘Registry’ section on the left panel and click ‘Scan for problems’.

Step 4: The process of looking for corrupted registries will now begin. Allow the software to complete its examination.

When you’ve finished, select ‘Fix Selected Issues’ to fix all of the broken registers that your computer has discovered. Close the application and restart your computer once the problem has been resolved.

Frequently Asked Questions (FAQ) about Application Error 0xC0000005 in Windows 10, 8, and 7:

1. What is Application Error 0xC0000005?

Application Error 0xC0000005 is an access violation error that occurs when an application attempts to access memory locations it doesn’t have permission to access. It commonly leads to application crashes or failure to execute properly.

2. What causes Application Error 0xC0000005 in Windows?

Several factors can cause Application Error 0xC0000005, including memory access violations, corrupted system files, hardware issues, software conflicts, and malware infections.

3. How can I fix Application Error 0xC0000005?

To fix Application Error 0xC0000005, you can try updating Windows and drivers, running a System File Checker (SFC) scan, checking for memory issues, performing disk cleanup, disabling Data Execution Prevention (DEP), and performing a clean boot.

4. How do I update Windows and drivers to fix Application Error 0xC0000005?

You can update Windows and drivers by accessing Windows Update for system updates and visiting the manufacturer’s website for driver updates. Ensure that you install the latest updates and drivers compatible with your Windows version.

5. What is the System File Checker (SFC) scan, and how does it help fix Application Error 0xC0000005?

The System File Checker (SFC) scan is a built-in Windows utility that scans for and repairs corrupted or missing system files. Running an SFC scan can help fix Application Error 0xC0000005 by repairing any corrupted system files that may be causing the error.

6. How can I check for memory issues to resolve Application Error 0xC0000005?

You can check for memory issues using the Windows Memory Diagnostic tool. This tool scans your computer’s memory for errors and helps identify any memory-related issues that may be causing Application Error 0xC0000005.

7. Should I disable Data Execution Prevention (DEP) to fix Application Error 0xC0000005?

Disabling Data Execution Prevention (DEP) for the problematic application can sometimes help fix Application Error 0xC0000005. However, it’s essential to be cautious when disabling DEP, as it’s a security feature designed to protect your system from malicious software.

8. What is a clean boot, and how does it help resolve Application Error 0xC0000005?

A clean boot starts Windows with a minimal set of startup programs and services, which can help identify and troubleshoot software conflicts that may be causing Application Error 0xC0000005. By performing a clean boot, you can isolate the problematic application and resolve the error.

9. Can malware infections cause Application Error 0xC0000005?

Yes, malware infections can corrupt system files and interfere with the proper functioning of applications, leading to Application Error 0xC0000005. It’s essential to run reliable antivirus software and perform regular scans to detect and remove malware infections.

10. What should I do if none of the troubleshooting steps fix Application Error 0xC0000005?

If none of the troubleshooting steps resolve Application Error 0xC0000005, consider seeking further assistance from technical support forums, Microsoft support, or professional IT services. They can offer additional guidance and help you diagnose and fix the issue specific to your system configuration.

Read Also:

  1. CTF Loader
  2. Message+ Keeps Stopping
  3. Data Error Cyclic Redundancy Check

Conclusion

The 0xc0000005 error code should no longer be present on your computer at this point. In the event that this is not the case, you should seek the help of a formal operator to find out where the problem resides.

In many circumstances, a problem with the system’s hardware can be the root cause of the error. Remove it as soon as possible to avoid further damage to your desktop.

LEAVE A REPLY

Please enter your comment!
Please enter your name here